Hard Water Spots

Your vehicle can incur damage from hard water spots just about anywhere it comes into contact with water – from rain, puddles, running sprinklers or even a DIY car wash in your driveway. Hard water spots occur as a result of water that has not been filtered to remove minerals, such as calcium and magnesium. These minerals become suspended in water droplets prior to drying, leaving behind seemingly harmless spots on your vehicle’s unprotected painted surfaces that can actually cause permanent damage by etching into the clear coat. The result – circular shaped marks left on your vehicle’s unprotected paint where the water spots evaporated. Over time, repeated exposure to hard water can make these spots difficult, if not impossible to remove.

ECP’s patented Diamond Ceramic Exterior Protection® is the first ever long-term protective coating to combine nano diamonds with ceramic technology. Together, these two technologies maintain 97.8% of your vehicle’s gloss and shine over 7 years, while filling and protecting every inch of the vehicle’s paint, making it impenetrable to hard water spots caused by rain, sprinklers and any other unfiltered hard water source, as well as environmental impurities. Diamond Ceramic Exterior Protection® also contains a unique polymer blend that creates tight water beading while helping reduce the harsh effects of hard water mineral build-up. Contaminants are easily rinsed and removed, without permanent damage to the vehicle’s paint or clearcoat. The result is a smooth, reflective paint finish free from environmentally induced cosmetic blemishes.